feat: standardize algorithm measurement results

alg/00_算法交付与输出规范/examples/head-car-coupler-and-deflection.result.json

@@ -0,0 +1,72 @@
+{
+  "schemaVersion": 1,
+  "measurementContractVersion": "1.0",
+  "status": "completed",
+  "message": "头车车钩偏转与左右梁挠度测量完成",
+  "context": {
+    "inspectionObject": "head",
+    "inspectionObjectName": "头车"
+  },
+  "measurements": [
+    {
+      "taskNo": "5",
+      "metricCode": "underframe.longitudinal_beam.vertical_deflection",
+      "name": "纵向梁到直线的垂直偏差（挠度）",
+      "position": "左梁",
+      "value": 0.265,
+      "unit": "mm",
+      "tolerance": 7.0,
+      "toleranceLabel": "±7 mm",
+      "status": "pass"
+    },
+    {
+      "taskNo": "5",
+      "metricCode": "underframe.longitudinal_beam.vertical_deflection",
+      "name": "纵向梁到直线的垂直偏差（挠度）",
+      "position": "右梁",
+      "value": 0.270,
+      "unit": "mm",
+      "tolerance": 12.0,
+      "toleranceLabel": "±12 mm",
+      "status": "pass"
+    },
+    {
+      "taskNo": "8",
+      "metricCode": "coupler.panel.reference_plane.right_deflection",
+      "name": "车钩面板到参考面的右偏转角",
+      "value": 0.022,
+      "unit": "mm",
+      "baseline": 375.0,
+      "tolerance": 0.8,
+      "toleranceLabel": "0.8/375 mm",
+      "status": "pass"
+    },
+    {
+      "taskNo": "10",
+      "metricCode": "coupler.panel.longitudinal_center.right_deflection",
+      "name": "车钩面板到纵向中心的右偏转角",
+      "value": 0.073,
+      "unit": "mm",
+      "baseline": 700.0,
+      "tolerance": 1.0,
+      "toleranceLabel": "1/700 mm",
+      "status": "pass"
+    }
+  ],
+  "extra": {
+    "intermediateMetrics": [
+      {
+        "metricCode": "coupler.panel.dx_y_max",
+        "name": "Y 方向计算用最大 X 偏差",
+        "value": 0.010,
+        "unit": "mm"
+      },
+      {
+        "metricCode": "coupler.panel.dx_z_max",
+        "name": "Z 方向计算用最大 X 偏差",
+        "value": 0.010,
+        "unit": "mm"
+      }
+    ]
+  }
+}

alg/00_算法交付与输出规范/examples/invalid-legacy-result.json

@@ -0,0 +1,27 @@
+{
+  "schemaVersion": 1,
+  "measurementContractVersion": "1.0",
+  "status": "completed",
+  "measurements": [
+    {
+      "name": "任务46_车体横断面对角线差值",
+      "metricCode": "vehicle.diagonal.delta",
+      "value": 0.592,
+      "unit": "mm",
+      "status": "info"
+    }
+  ],
+  "extra": {
+    "intermediateMetrics": [
+      {
+        "taskNo": "debug-1",
+        "metricCode": "coupler.panel.dx_y_max",
+        "name": "最大 x 偏差 dx_y",
+        "value": 0.01,
+        "unit": "mm",
+        "status": "pass",
+        "tolerance": 1.0
+      }
+    ]
+  }
+}